This panel antenna delivers extended access point range in a single floor environment ideally positioned in the corner of a building. It functions from point-to-point so that you can wirelessly connect LANs between the buildings in a campus-type environment. It provides multiform transmission when placed on a ceiling, as the higher powder output extends the range through typical flooring materials.
You can make it this antenna by your self. I was made the picture file with the coreldraw, so you just open it with coreldraw and print it. It make it easy to you for gain high signal wireless from far away access point.
Download File Antenna
This is Specification of Antenna Flat Pannel
Dimensions
- Designed for wireless LAN communications
- Mounts easily for indoor or outside applications
- Designed to obtain maximum gain
- Made with weatherproof and corrosion resistant
- There is a mounting kit with panel antenna
You can make it this antenna by your self. I was made the picture file with the coreldraw, so you just open it with coreldraw and print it. It make it easy to you for gain high signal wireless from far away access point.
Download File Antenna
This is Specification of Antenna Flat Pannel
- Frequency 2400-2483 MHz
- Gain 18dBi
- Polarization Vertical
- Beamwidth degree Horz.35° Vert.18°
- (Vertical & Horizontal)
- VSWR 1.5:1
- Impedance 50 Ohm
Dimensions
- Size L263 x W263 x H50 mm
- Weight 1810 g
- Connector N - Type / Female
4 comments:
Bro..how far this antenna can capture an AP(Access Point) ?
please look up this post http://www.wirelessmodify.co.cc/2009/05/antenna-flat-pannel-18db.html
thank's for comment it
Dear Sir,
I was wondering what is the distance between the
back metal reflector and the front PCB radiator element, the gap is really important to determine
the VSWR.
If I print out the coreldraw file, is the drawing following the exact meaurements as shown on the picture?
Thank you in advance.
hi there...
yes of course..
Post a Comment